This RC model is a completely original design by Jake. The model was designed to represent the fierce Frill Dragon Lizard, to accomplish the look of this reptile, optional air-brakes in the shape of its Frill neck skin was represented. The plane was originaly setup with Elevrons only, however the plane can be modified to accommodate Ailerons and a single Elevator in the back for extreme performance. The original RC model design was made with Foamboard and covered with colored sealing/packing tape. Other materials such as Depron and Fan Fold Foam may be used to make this model.
- Wing Span: 26 Inches (66.04cm)
- Length: 26.88 Inches (68.28cm)
- AUW: 22 Ounces (623.7gm) (As Built with FoamBoard, Depron or Fan Fold will result in much lighter model)
- Servos: 4 Micro (Metal Gear) with Air Brakes (2 without)
- Motor: 2212/6 for Basic Setup (Grayson Hobbies Super Mega Jet for Performance Setup)
- Speed: 65mph to 85+mph (104kph to 136kph) depending on motor used
- Required Radio: Minimum 4-Channel (Recomended 2.4ghz)
- Flight Skill Required: Intermediate to Advanced
- Building Skill Required: Beginner to Intermediate
