EPP Jet - Information and Plans
Picture		Sponsor Ad
EPP Jet RC Model Designed by: Paul Petty This RC model is not based on any real aircraft, but instead an original Design by paul. The original RC model design was made with EPP Foam and covered with fiberglass weave and then colored sealing/packing tape. This plane was originally built to be a speed plane and was the first in the rcFoamFighters collection to break 100mph!.
Free Tiled PDF Plan	Free Non-Tiled PDF Plan
	Non-Tiled PDF is not Available at this time
	All plans are free, but if you would like to directly support and encourage the Model Designer, donations are welcome. That or if you just want to buy the designer a beer, or more like a late night coffee, thats cool too...LOL. Any help to support the rcFoamFighters team and their efforts is greatly appreciated.
BASIC RC MODEL NOTES: Wing Span: 30 Inches (76.2cm) Length: 36 Inches (91.44cm) AUW: 31 Ounces (878.9gm) (As Built with 1.9 EPP, Blue Core or other foams may result in a lighter model) Servos: 2 Micro (Metal Gear Recommended) Motor: Grayson Hobbies Super Mega Jet (Turnigy 2836-2350 Motor) Speed: 85mph to 100+mph (136.8kph to 160.9kph) depending on motor used Required Radio: Minimum 4-Channel (Recomended 6 channel 2.4ghz) Flight Skill Required: Intermediate to Advanced Building Skill Required: Intermediate

Parts And Equipment Ideas For This Model			Sponsor Ad
Brushless Motors
Super Mega Jet Combo Combo Pack, ESC included!	TURNIGY 2836-2350 Note, Motor shaft must be reversed to use this motor.	--
Brushless ESC's (With BEC)
TURNIGY 40A Plush	TURNIGY 40A K-Force
Lipo Batteries
TURNIGY 2200 3S 30c	Grayson Hobbys 3S 2200ma 30-40C Lipo	rcPerformaxx 2200 3S 40c-80c
Servos
Hextronik MG Servo	Corona MG Servo
Radios and Tape

Copyright rcFoamFighters.com 2010